Brick and besser block calculator (Australia)
Enter the wall length and height in metres, subtract windows and doors, and choose standard bricks, double brick or 390 mm besser blocks. You get the number to order, premix mortar bags for brickwork and an indicative bricklaying cost.
How many bricks or blocks per m²
A standard Australian brick is 230 × 110 × 76 mm. With 10 mm joints that is about 48.5 bricks per m² of single-skin wall (Midland Brick technical figure): (0.230 + 0.010) × (0.076 + 0.010) = 0.0206 m² per brick. A double-brick wall, common in WA, takes about 97 per m². Littlehampton Bricks & Pavers suggests ordering about 3% extra.
A 200-series besser block (390 × 190 × 190 mm) covers 0.4 × 0.2 = 0.08 m² with its joint, so 12.5 blocks per m² and 2.5 per lineal metre of course (BCP Masonry, 2024). Core-filled blockwork and retaining walls need an engineer’s detail for reinforcement.
Mortar and labour
A 20 kg bag of premixed mortar lays about 20 house bricks (Cement Australia) to 28 bricks (Cockburn Cement), so allow 36–50 bags per 1,000 bricks. Mixing your own takes about 0.6 m³ of damp bricklaying sand per 1,000 bricks (Cockburn).
Bricklaying labour is usually quoted per 1,000 bricks laid: WhatsTheDamage (Nov 2026) gives $1,000–$2,200, typically about $1,600, excluding the bricks. Masonry design in Australia follows AS 3700 Masonry structures and AS 4773 Masonry in small buildings.
Bricklaying and block prices in Australia (AUD)
| Item | Price (AUD) | Source | Date |
|---|---|---|---|
| Bricklaying labour, per 1,000 bricks | $1,000 – $2,200 (typ. $1,600) | WhatsTheDamage | Nov 2026 |
| Standard bricklaying, per m² | $55 – $120 (typ. $80) | WhatsTheDamage | Nov 2026 |
| Brick retaining wall, per m² | $250 – $650 (typ. $450) | WhatsTheDamage | Nov 2026 |
| 18 m² standard job, typical | Sydney $1,656; Melbourne $1,512; Perth $1,512; Brisbane $1,440; Hobart $1,296 | WhatsTheDamage | Nov 2026 |
| Besser block 390 × 190 × 190, each | about $4.40 – $9.10 depending on retailer | Retailer listings (Bunnings, Bunnings Trade, local yards) | seen 14 Nov 2026 |
These are indicative ranges from the named sources on the dates shown, not quotes. Prices vary with site access, finishes and season; get at least three written quotes. Licensing thresholds differ by state: in NSW a licence and a written contract are needed for residential building work over $5,000 incl. GST (NSW Government, Guide to providing home building contracts, updated 11 Jun 2026); in Queensland a QBCC licence is needed for building work valued over $3,300 (QBCC, When you need a licence); in Victoria builder registration applies to domestic building work over $10,000, with single-trade work such as tiling, painting, plumbing or electrical exempt from builder registration (Consumer Affairs Victoria, updated 12 Dec 2025). Plumbing, gas and electrical work always needs a licensed tradie.
Frequently asked questions
How many bricks per m² in Australia?
About 48.5 standard 230 × 110 × 76 mm bricks per m² of single-skin wall with 10 mm joints; order about 50 to allow for waste.
How many besser blocks per m²?
12.5 full 390 × 190 mm-face blocks per m² of wall, or 2.5 per lineal metre per course.
How many bricks in a double brick wall per m²?
About 97 per m² before wastage.
What does a bricklayer charge?
Roughly $1,000–$2,200 per 1,000 bricks laid, typically about $1,600, excluding the bricks (WhatsTheDamage, Nov 2026).
How many bags of mortar per 1,000 bricks?
About 36–50 bags of 20 kg premix, depending on the brand (20–28 bricks per bag).
Other Australian calculators
Sources
- WhatsTheDamage — Brick calculator and bricklaying cost (Nov 2026)
- BCP Masonry — block brochure (2024)
- Midland Brick — technical manual (via WhatsTheDamage)
- Cement Australia / Cockburn Cement — mortar yields (via WhatsTheDamage, Oct 2026)