Bathroom renovation cost calculator (Australia, 2026)

Pick a finish level and your city to see a realistic AUD range for a full bathroom or ensuite reno, with the typical line items a builder or tiler will quote. Figures are indicative market ranges, not a quote.

Prices in AUD, metric units. Last reviewed 14 November 2026.

Advertisement
Advertisement
Advertisement

What drives the cost of a bathroom reno

The biggest swing factors are the finish level (basic, mid-range, premium or luxury), whether the layout changes (moving the shower, toilet or floor waste means new plumbing rough-in), and the size of the room. An ensuite of 3–5 m² on the same layout typically lands around $21,000, within a $15,000–$30,000 range (WhatsTheDamage, Nov 2026).

Every wet area must be waterproofed before tiling. Waterproofing itself is a small line item ($700–$3,500, typically about $1,400), but it is the one that causes the costliest failures when it is skipped or done badly.

City matters: the same mid-range job costs roughly 15% more in Sydney than in Brisbane, based on the city ranges WhatsTheDamage publishes (Sydney $11,500–$40,250 vs Brisbane $10,000–$35,000).

Advertisement

Waterproofing rules every bathroom must meet

Under the NCC 2022 ABCB Housing Provisions Part 10.2 (still in force in NSW and QLD until May 2027), the shower floor including any hob or step-down must be waterproof, and shower walls must be waterproofed to not less than 1800 mm above the floor substrate (10.2.2).

Where a floor waste is installed, the floor fall must be between 1:80 and 1:50 (10.2.12). For an unenclosed (hobless, screen-free) shower, a waterstop is required at least 1500 mm horizontally from the shower rose (10.2.18).

AS 3740:2021 Waterproofing of domestic wet areas is the Deemed-to-Satisfy route the ABCB points to. Victoria and WA adopted NCC 2025 from 1 May 2026, so check with your certifier whether clause numbers have changed for your job.

Indicative bathroom renovation prices in Australia (AUD, incl. GST)

ItemPrice (AUD)SourceDate
Basic reno$10,000 – $20,000 (typ. $15,000)WhatsTheDamageNov 2026
Mid-range reno$20,000 – $35,000 (typ. $27,000)WhatsTheDamageNov 2026
Premium reno$35,000 – $55,000 (typ. $42,000)WhatsTheDamageNov 2026
Luxury reno$55,000 – $80,000 (typ. $65,000)WhatsTheDamageNov 2026
Ensuite, 3–5 m², same layout$15,000 – $30,000 (typ. $21,000)WhatsTheDamageNov 2026
Standard bathroom reno (overall)$15,000 – $35,000; premium $35,000+CanstarJul 2026
Waterproofing (line item)$700 – $3,500 (typ. $1,400)WhatsTheDamageNov 2026
Tiling, supply and lay, whole bathroom$2,800 – $7,500 (typ. $5,000)WhatsTheDamageNov 2026
Plumbing rough-in$2,000 – $5,000 (typ. $3,000)WhatsTheDamageNov 2026
Strip-out and disposal$1,000 – $3,000 (typ. $1,800)WhatsTheDamageNov 2026

These are indicative ranges from the named sources on the dates shown, not quotes. Prices vary with site access, finishes and season; get at least three written quotes. Licensing thresholds differ by state: in NSW a licence and a written contract are needed for residential building work over $5,000 incl. GST (NSW Government, Guide to providing home building contracts, updated 11 Jun 2026); in Queensland a QBCC licence is needed for building work valued over $3,300 (QBCC, When you need a licence); in Victoria builder registration applies to domestic building work over $10,000, with single-trade work such as tiling, painting, plumbing or electrical exempt from builder registration (Consumer Affairs Victoria, updated 12 Dec 2025). Plumbing, gas and electrical work always needs a licensed tradie.

Frequently asked questions

How much does a bathroom renovation cost in Australia?

A standard reno typically costs $15,000–$35,000, with premium jobs above $35,000 (Canstar, Jul 2026). WhatsTheDamage puts a typical mid-range reno at about $27,000 (Nov 2026).

Is a bathroom reno cheaper in Brisbane than in Sydney?

Yes. WhatsTheDamage (Nov 2026) gives Brisbane $10,000–$35,000 against Sydney $11,500–$40,250 for the same scope, roughly 15% less.

How high must shower walls be waterproofed?

At least 1800 mm above the floor substrate, under NCC 2022 Housing Provisions 10.2.2.

What fall does a bathroom floor need?

Between 1:80 and 1:50 to the floor waste where one is fitted (Housing Provisions 10.2.12).

Do I need a licensed builder for a bathroom reno?

Generally yes above $5,000 in NSW, $3,300 in Queensland and $10,000 in Victoria (single-trade work excepted in VIC). Plumbing and electrical work always needs a licensed plumber and sparky.

Other Australian calculators

Sources

Advertisement