Stair calculator
Enter the floor-to-floor height and the calculator picks the number and height of risers, then gives the total run, pitch and stringer length. It checks comfort with the step rule 2h + g and the limits of the Polish building regulations.
1. Height and space
2. Steps
Result
How we calculate
Number of risers = floor-to-floor height ÷ target riser, rounded to a whole number. Riser h = floor-to-floor height ÷ number of risers. There is one tread fewer than risers, because the top step is the upper floor. Total run = number of treads × tread depth g. Comfort is checked with the step rule 2h + g = 60–65 cm, which matches the length of a stride. Pitch = arctan(h ÷ g), stringer length = square root of height squared plus run squared.
The calculator covers a straight single flight. The limits follow the Polish technical conditions (§ 68 and § 69): single-family house up to 19 cm riser and at least 80 cm width, multi-family and public buildings up to 17.5 cm and at least 120 cm. Check your local rules, for example Approved Document K in England, and have the design checked by a designer.
How the calculator works – questions and answers
How many steps for a height of 280 cm?
With a floor-to-floor height of 280 cm the usual result is 16 risers of 17.5 cm, which is 15 treads. With a tread depth of 27 cm the flight is 405 cm long in plan and the step rule 2h + g gives 62 cm.
What is the maximum riser height?
Under the Polish technical conditions (§ 68) a riser may be at most 19 cm in a single-family house or a two-level flat and 17.5 cm in multi-family and public buildings. Risers of 16–18 cm are considered the most comfortable. Other countries set their own limits.
What does the rule 2h + g = 60–65 cm mean?
It is the rule for comfortable stairs: two risers plus one tread should equal the stride of an adult, which is 60–65 cm. For a 17.5 cm riser a comfortable tread is 25–30 cm, ideally about 28 cm.
How wide should stairs be in a single-family house?
The Polish technical conditions require at least 80 cm of clear width in a single-family house and 120 cm in a multi-family building. In practice 90–100 cm lets two people pass and furniture be carried in a house.
What stair pitch is comfortable?
Comfortable indoor stairs have a pitch of 30–35 degrees. Above 38 degrees they are steep and harder to walk down, and below 25 degrees they take up a lot of space. A 17.5 × 27 cm step gives about 33 degrees.
Other free BrikBeam calculators
❄️ Roof snow load calculator 🎨 Paint calculator 🧱 Concrete calculator 🛁 Bathroom renovation calculator 🔲 Tile calculator 🪵 Laminate flooring calculator ⏱️ Labour rate calculator ♨️ Underfloor heating calculator 🧱 Block and brick calculator 🪵 Roof truss calculator 🏠 Facade & insulation calculator 📐 Renovation planner & estimator 🧰 All toolsThe tool is free and runs in your browser – nothing is sent to a server.