Guide: how to read a bathroom renovation quote
Per square metre or per tile? Two ways tilers quote
Most tilers quote a rate per square metre of laid tiles. It is easy to measure and to compare. In Poland in 2026 standard formats such as 30×60 and 60×60 usually cost 130–170 PLN/m² to lay, 60×120 about 170–230 PLN/m², and slabs of 120×120 and larger from 220 PLN/m² upwards. Large cities are noticeably more expensive than small towns, which is why the calculator has a regional multiplier. For other markets the defaults are scaled with rough local indices, so replace them with rates from your own quotes.
Some tilers price per piece instead, a method several of them explain in short videos. They take one wall, work out its area and divide it by the number of tiles that fit. A 275 × 240 cm wall is 6.6 m². It takes 10 upright tiles of 60×120: five columns, two rows. Each tile therefore stands for 0.66 m², and at 300 per m² that is 198 per piece. From then on every laid piece costs the same, whole or cut.
On a plain wall both methods give the same total. They differ where there are many small parts: window reveals, bath and WC boxing, shelves, plinths, narrow strips under the ceiling. A small piece still has to be measured, cut, edged and set, which is often more work than a full tile. Priced per m² those pieces weigh almost nothing; priced per piece they cost as much as a full tile. The calculator shows both totals side by side.
Why large formats cost more
A 60×120 tile weighs well over ten kilograms and a 120×280 slab about fifty. Moving them takes suction lifters, a carrying frame and usually a second person. The substrate has to be flat to about 2 mm over two metres, adhesive goes on both the wall and the back of the tile, and joints are aligned with a levelling system. A wrongly cut hole in a small tile costs little; in a large slab it can cost a day of work and a new delivery. Hence the higher rate and the larger waste allowance.
What the per-m² rate usually leaves out
The rate covers fixing and grouting on a prepared substrate. Removing old tiles and debris, levelling, priming and waterproofing are separate. So are mitred 45° edges (per running metre), cut-outs for sockets and pipes (per piece), niches, a linear drain with falls and silicone. Plumbing and electrical points, the WC frame, shower or bath, vanity unit, fan and ceiling paint come on top. In a small bathroom these items together often exceed the tiling itself.
Materials and how to use the result
Tiles are sold in full boxes, so the calculator multiplies the area by the waste allowance and rounds up to boxes. Adhesive runs from about 3 kg/m² for small tiles to 5.5–7 kg/m² for large formats. Waterproofing is cheap and essential: two coats on the whole floor with an upstand on the walls, and on the wet-zone walls to at least two metres.
Treat the result as a range. Print the summary or copy the link and ask two or three contractors to quote the same list of items, stating whether they charge per m² or per piece and what their unit prices for extras are.